Panther T4 - Through Tilt Tube Electro Steer -Saltwater
Unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9" minimum needed between main engine and kicker motor. Controlled by a 24' cable and two button hand held remote. Wireless option available.
WIRELESS OPTION AVAILABLE55-0103 Spec Sheet
Electro Steer Remote Auxiliary Steering Model 100 Freshwater
The Panther 100 Electro Steer is easy to install anywhere in the transom area. It operates the motor with the push of a button. Powered from the cranking battery; maximum amp draw: 5 to 7.5 amps. And fast? The Electro Steer will move from full right to left in only four seconds, with fast, precision kicker control, necessary for contour trolling. The connecting rod between the main and kicker motor easily disconnects, allowing versatile applications.
WIRELESS OPTION AVAILABLE55-0100A Spec SheetOwners Manual
Panther 101 Saltwater Electro Steer
With the freshwater model’s success, a great product is made better with the introduction of the Electro Steer Saltwater Model. The corrosion resistant stainless steel frame and saltwater-proof gear rack offers the utmost in durability and dependability. A fast response provides precise control for any trolling application.
WIRELESS OPTION AVAILABLE55-0101A Spec Sheet
T4 Auto Pilot Drive Unit
SKU: 55-0102AUTO T4 Autopilot Drive, Freshwater
SKU: 55-0103AUTO T4 Autopilot Drive, Saltwater
The patented T4 Auto Pilot Drive Unit was specifically designed for the Sport Trolling Fishermen.
For use with a kicker motor at speeds of less than 5 knots/hours. The factory installed rudder
reference interfaces with existing auto pilots like Furuno, Raymarine and Simrad, which allows you to stay on your plotted course while trolling at speeds as low as 1.1 mph. Trolling with an auxiliary outboard offers the angler tremendous fuel savings over much larger sterndrives or inboards. No holes to drill, no messy hydraulic lines or pumps and is easily installed on the motor's threaded tilt tube.
For the ultimate Trolling experience, add a TrollMaster electronic throttle control for speed adjustment to 1/10 mph.
*NOTE: CANNOT be used if you have a main engine to kicker steering tie bar.
The main engine tie bar must be disconnected. Owners Manual
Auxiliary Motor Steering Kit - Stainless Steel
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horse-power. The model 55-2600 is constructed of stainless steel. Non-corrosive for saltwater applications.55-2600 Spec SheetOwners Manual
Auxiliary Motor Steering Kit - Zinc
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horse-power. The model 55-2400 is constructed of Zinc plate steel.55-2400 Spec SheetOwners Manual
Main Engine Trolling Motor Tie Bar Kit
SKU: 552700 - SeaStar Solutions steering
SKU: 552900 - UFlex steering
The Panther Trolling Motor Tie Bar Kit connects an auxiliary trolling motor to SeaStar Solutions or Uflex hydraulic steering. The Trolling Motor Tie Bar
is 1⁄2” thick and along with the drive bracket composed entirely of stainless steel. Extremely heavy duty. The rod is fully threaded so it can be cut for custom installations. Up to 40HP.55-2700 Spec Sheet
Drive Bracket - SeaStar Solutions
The Panther Drive Bracket is composed of stainless steel, and is the same bracket that is included with the Panther Model 55-2700 Trolling Motor Tie Bar Kit. The bracket attaches directly to the most common hydraulic steering units including the SeaStar Solutions and can be combined with our Model 55-2400 and 55-2600 for a professional installation. It’s never been easier to install a main engine/kicker tie bar kit.Owners Manual
55-2750 Spec Sheet
Drive Bracket - Uflex
The Panther Drive Bracket is made of stainless steel and is the same bracket included with the Panther Model 55-2900 Trolling Motor
Tie Bar Kit. The bracket attaches directly to the most
common hydraulic steering units including Uflex and can be combined with our Model 55-2400 and 55-2600 for a professional installation. It has never been easier to install a main engine to kicker tie bar kit.
Motor Link Adapter Kit -For Hydraulic Steering
This kit is used specifically to adapt our steering Kits to your main engine hydraulic steering. A cleverly designed L shaped bracket makes steering your kicker motor from your console an everyday event. The Kit includes L bracket, washers, mounting bolt, locktite, and instructions.55-5705 Spec Sheet